How do I choose between a prep counter and an upright fridge for my kitchen?
FAQ
Choose based on workflow first, then space.
This FAQ is designed for a fast answer first. Use the related guide links if you need the fuller decision path behind the short version.
Choose based on workflow first, then space.
Pick a prep counter (or prep setup) when speed at the line matters: you need ingredients within arm’s reach during service (sandwich, deli, pizza, salad assembly) and you want to reduce trips to the fridge.
Pick an upright fridge when storage and flexibility matter: you need bulk chilled capacity, mixed product storage, and easy re-configuration with shelving (typical for back-of-house, hotels, catering kitchens).
A practical rule: if staff are opening the fridge repeatedly during peak service to grab toppings or garnishes, you will usually benefit from a dedicated prep station plus separate bulk storage. If service is lighter and you can batch-prep, an upright fridge plus a clean prep bench can be enough.
Read the full guide: Unifrost CTG/CTS Cold Topper vs Upright Fridge: A Chilled Prep vs Bulk Storage Planning Guide for Irish Kitchens.
Read the fuller guide around this question
These articles are the best next reads if the visitor wants a deeper product choice, maintenance, or support route from here.
FAQ
What temperature should my commercial upright freezer be set to for safe frozen storage?
For day-to-day safe frozen storage in a hotel kitchen, set the freezer to hold product at -18°C or colder.
Read guide
FAQ
How do I change or check the temperature setpoint on a Unifrost upright freezer’s digital controller?
Unifrost uprights in this family commonly use Dixell, Elitech, or Carel controllers. The exact button names vary, but the owner-safe workflow is usually the same:
Read guide
FAQ
What are the recommended default temperature and alarm settings for a new Unifrost F410SS?
If you want a simple, low-drama hotel baseline that protects frozen food without constant nuisance alarms, start here:
Read guide