How do I set up the shelves and GN pans on day one in the Unifrost F410SS?

Unpack and check parts: confirm you have the shelf supports/runners, wire shelves, and any GN pan rails or basket frames supplied with your unit.

Position the supports first: fit the supports into the same height positions on both sides so each shelf/rail sits level.

Start with a “service zone” in the middle: set one shelf around mid height for your highest-pick items so you are not bending or reaching during service.

Add GN pans where speed matters: use GN pans for portioned or open-and-close items (for example chips portions, dessert portions, prepped sides). Keep like-with-like per pan and label the front edge.

Leave clearance for airflow: avoid pushing GN pans tight against the back wall and avoid overhanging liners that block air movement around the pan.

Do a dry run before loading: open the door, simulate a busy pick, and adjust shelf spacing so your most-used pans are reachable without moving other stock.

If your kitchen uses both bulk and service stock, keep the top/bottom for slower-moving bulk items and the middle for fast-pick pans and baskets.

Read the full guide: Unifrost F410SS Upright Freezer Shelf and GN Pan Setup Guide for New Owners.